Rs-232c interface, Command table – Panasonic AJ-HD1700PE User Manual
Page 125
125
RS-232C interface
5. Command table
∫
Commands relating to operation control
<Notes>
• As the return (completion) message, [ACK] is
returned when data is received, and only the
execution message which is subsequently
returned is listed in the table.
• If a command not listed in the table is received,
ER001 (invalid command) is returned after
[ACK].
VTR
operation
Send command
STOP
[STX] OSP [ETX]
45
[STX] OSP [ETX]
This command is for stopping the tape transport.
The resulting output picture and sound statuses
differ according to the setting selected for the
setup menu item No.105 (AUTO EE SEL).
For details, refer to the setup menus.
Return (completion)
message
STANDBY
OFF
[STX] OBF [ETX]
45
[STX] OBF [ETX]
This command is for setting the VTR to standby
OFF.
STANDBY ON
[STX] OBN [ETX]
45
[STX] OBN [ETX]
This command is for setting the VTR to standby
ON.
VTR
operation
Send command
SHTL
FORWARD
[STX] OSF:data [ETX]
45
[STX] OSF [ETX]
This is the forward direction shuttle command.
data = n:
speed data
0:
STILL
1:
k
0.03
2:
k
0.1
3:
k
0.2
4:
k
0.5
5:
k
1
6:
k
2.0
(1.85
k
for formats other than
DVCPROHD-LP)
7:
k
4.9
8:
k
9.8
9:
k
16
A:
k
32
<Note>
The 16
k
and 32
k
speeds differ according to the
setting selected for setup menu item No.101
(SHTL MAX).
Return (completion)
message
SHTL
REVERSE
[STX] OSR:data [ETX]
45
[STX] OSR [ETX]
This is the reverse direction shuttle command.
data = n:
speed data
0:
STILL
1:
k
0.03
2:
k
0.1
3:
k
0.2
4:
k
0.5
5:
k
1
6:
k
2.0
(1.85
k
for formats other than
DVCPROHD-LP)
7:
k
4.9
8:
k
9.8
9:
k
16
A:
k
32
<Note>
The 16
k
and 32
k
speeds differ according to the
setting selected for setup menu item No.101
(SHTL MAX).
EJECT
[STX] OEJ [ETX]
45
[STX] OEJ [ETX]
This command is for ejecting the cassette tape.
The resulting output picture and sound statuses
differ according to the setting selected for the
setup menu item No.105 (AUTO EE SEL).
For details, refer to the setup menus.
PLAY
[STX] OPL [ETX]
45
[STX] OPL [ETX]
This command is for starting playback.
REWIND
[STX] ORW [ETX]
45
[STX] ORW [ETX]
This command is for rewinding the tape. The
resulting output picture and sound statuses differ
according to the setting selected for the setup
menu item No.105 (AUTO EE SEL).
The maximum speed differs according to the
setting selected for the setup menu item No.102
(FF. REW MAX).
For details, refer to the setup menus.
FAST
FORWARD
[STX] OFF [ETX]
45
[STX] OFF [ETX]
This command is for fast forwarding the tape.
The resulting output picture and sound statuses
differ according to the setting selected for the
setup menu item No.105 (AUTO EE SEL).
The maximum speed differs according to the
setting selected for the setup menu item No.102
(FF. REW MAX).
For details, refer to the setup menus.
REC
[STX] ORC [ETX]
45
[STX] ORC [ETX]
This command is for starting recording.