Panasonic AJ-HD1700PE - Manual (Page 64)

64
Function menus
<PF1/PF2>
F1 SHIFT F2 F3 F4 F5 F6
Menu name
Selection marker
Registered menu number
Item selection cursor
Item number
Item number
Category
Setting number
Item name
Press (RESET) while holding down the button.
All the registered menu number and name displays
will now go blank.
All the contents of the PF registration file are cleared.
(They cannot be restored.)
F F4
Registration
Clearing the menu items
Clearing all the function button settings
1. Selecting the function buttons
Turn the ADJ dial to move the selection marker,
and select one of the function buttons
to
into which the menu items are to be registered.
F6 F1
2. Entering the function button
Press the ADJ dial.
The display of the function button entered is
highlighted.
1. Turn the ADJ dial to move the selection marker,
and select one of the function buttons
to
whose menu items are to be cleared.
F6 F1
2. Press (RESET). The registered menu
number and name displays will now go blank.
F4
3. To clear the menu items from other function
buttons, repeat steps 1 and 2 above.
4. To save what has been set in the function buttons
in a PF registration file, press
(SET).
If (EXIT) is pressed without the settings
having been saved, the above settings will be
canceled.
F6
F5
3. Selecting menu items
Turn the ADJ dial, and select the menu item for
the function button which was selected in step 1
above.
4. Entering the menu items.
Press the ADJ dial.
The target of the ADJ dial operation returns to the
front panel. Whatever was selected in step 3
above is displayed for the registered menu
number and name.
5. To select a menu item for another function button,
repeat steps 1, 2, 3 and 4 above.
6. Saving the settings in a PF registration file
To save what has been set in the function buttons
in a PF registration file, press
(SET).
If (EXIT) is pressed without the settings
having been saved, the settings will be canceled.
F6
F5
Up to 24 frequently used setup menu items can be
registered. The items are registered on the function
menus shown below. (No settings have been
registered before the VTR leaves the factory.)
To display one of the function menus, press
(PF1
FT), (PF1 BK), (PF2 FT) or (PF2 BK)
while holding down the button on the <MENU
SHIFT> screen.
F
F4 F3 F2
F1
When menu items are registered, they can be
called simply by pressing the PF1 or PF2 direct
menu button.
When
is pressed :
<PF1 FT>
When
is pressed after pressing :
<PF1 BK>
When
is pressed :
<PF2 FT>
When
is pressed after pressing :
<PF2 BK>
PF2 SHIFT
PF2
PF1 SHIFT
PF1
Setting