50p in/out assign, Function menus, Pins in which functions can be registered – Panasonic AJ-HD1700PE User Manual

Page 72: Registered item names, Registered values

Advertising
background image

72

Function menus

F1

SHIFT

F2

F3

F4

F5

F6

Registered item name

Registered value

Selection marker

<50P IN/OUT ASSIGN>

Pins in which functions can be registered

IN pins:

Pins 6 to 20, 22, 23, 25

OUT pins: Pin 21, 24, pins 32 to 46, 48
All other pins are reserved and cannot be changed.

Using the front panel controls and on-screen menus,
functions are registered into the input pins of the
parallel remote (50PIN) connector and the statuses
are registered into its output pins.
When

(50P IN) or

(50P OT) is pressed while

the

button is held down on the <MENU SHIFT>

menu, the function menu shown below appears, and
functions can be registered or deleted.

F

F6

F5

Items which can be registered in the input and
output pins
Items identical to the setup menu items can be
registered in both the input and output pins. In
addition, there are a set of special items can be also
registered in the input pins and another set for the
output pins.
<Note>
System menu and submenu items cannot be
registered.

IN pins

OUT pins

1

REC

21

Range of pins to which any

items can be assigned

24

26

<Power>

27

REC

28

PLAY

29

FF

30

REW

31

STOP

32

Range of pins to which

any items can be

assigned

:

l

;

46

48

47

<GND>

49

<GND>

50

<GND>

2

PLAY

3

FF

4

REW

5

STOP

6

Range of pins to which

any items can be

assigned

:

l

;

20

22

23

25

Registration in input pins

Setup menu list

Special IN menu list

<No display>

<No display>

Special OUT menu list

Registration in output pins

100

000

Item no.

200

300

400

500

600

700

B00

C00

Registered item names

Setup menu items and 50PIN special menu items can
be registered in the parallel remote connector pins,
and the names of these menu items are displayed.

Registered values

One setting for the registered menu item is displayed
in each of the pins.
When active signals are input to the IN pins in which
the setup menu items mentioned above have been
registered, the settings for the registered menu items
take effect inside the VTR.
When the settings for the registered menu items tally
with the registered values, active signals are output
from the registered OUT pins.

Item selection cursor

Item number

Item number

Category

Setting

Setting number

Item name

Advertising