Panasonic PT-AE2000U - Manual (Page 16)

Getting Started
Setting up
16 -
E
NGLISH
If the projector is not positioned right in front of the center of the screen, you can adjust the projected image position
by moving the lens shift dials within the shift range of the lens.
J Adjusting the lens shift dials
Q Horizontal shift
You can place the projector where the projector lens is up to 40% horizontally off-center from the screen and
then adjust the image position with the Lens shift dial • Horizontal.
Q Vertical shift
You can place the projector where the projector lens is up to 100% vertically off-center from the screen and the
adjust the image position with the Lens shift dial • Vertical.
Lens shift and positioning
Turn the dial clockwise:
Moving to screen’s right
Up to about 40 %
of the projection
Turning the dial counterclockwise:
Moving to screen’s left
Up to about 40 %
of the projection
Up to about 100 %
of the projection
Up to about 100 %
of the projection
Shifting the lever down:
Moving to screen’s bottom.
Shifting the lever up:
Moving to screen’s top.