Panasonic PT-AE2000U - Manual (Page 39)

E
NGLISH - 39
Settings
LENS CONTROL
You can use the 2 different test patterns to adjust the
focus and zoom of the image. See “Lens shift and
positioning” on page 16.
1. Press ENTER to display test pattern 1.
Press F G to adjust the focus and I H to adjust
the zoom.
2. Press ENTER to display test pattern 2.
Press F G to adjust the focus and I H to adjust
the zoom.
3. Press ENTER to display the projected image.
You can confirm the adjustment is fit to the projected
image.
4. Press MENU or RETURN to return to the previous
menu, or press repeatedly to escape the menu
mode.
ZOOM/FOCUS
NOTE:
• When the projector and/or the screen is tilted, adjust
the focus at the center of the image. The upper and
lower edge might be out of focus.
• When the image is distorted in keystone, adjust the
KEYSTONE in POSITION menu.
Remote control Control panel
See “Navigating through the MENU” on page 30.
See “Main menu and sub-menu” on page 28.
RETURN FOCUS
ZOOM ENTER
RETURN FOCUS
ZOOM ENTER
FUNCTION BUTTON
You can assign certain menu options to the 3 function
buttons for instant operation.
1. Select the required button from BUTTON1,
BUTTON2 or BUTTON3 and press the ENTER
button.
2. Press F G I H to select the required menu
options and press the ENTER button.
Q BLANK function
You can stop the projection temporary for electrical
power save. Press any button except the LIGHT
and learning remote control buttons.
BUTTON1/2/3
HDMI 1 IN NORMAL
HDMI 2 IN DYNAMIC
HDMI 3 IN COLOR1
COMPUTER IN COLOR2
COMPONENT 1 IN CINEMA1
COMPONENT 2 IN CINEMA2
S-VIDEO IN CINEMA3
VIDEO IN SPLIT ADJUST
BLANK
WAVEFORM AUTO
ADJUST
AUTO SETUP MEMORY LOAD
CONTRAST BRIGHTNESS
CONTRAST R BRIGHTNESS R
CONTRAST G BRIGHTNESS G
CONTRAST B BRIGHTNESS B
Remote control Control panel
See “Navigating through the MENU” on page 30.
See “Main menu and sub-menu” on page 28.