Panasonic PT-AE2000U - Manual (Page 17)

Getting Started
Setting up
E
NGLISH - 17
J Projector location range
You can determine where to locate the screen and the projector by considering the lens shift possibilities. See
“Positioning the image” on page 21.
Q When the screen position is fixed
Q When the projector position is fixed
NOTE:
• When the projector is located right in front of the screen and the lens shift dials is centered, you will get the best quality of
the projection image.
• When the Lens shift dial • Vertical is at the vertical limit of the shift range, you cannot turn the dial to the horizontal limit,
likewise when the Lens shift dial • Horizontal is at the horizontal limit of the shift range, you cannot turn the dial to the
horizontal limit.
• When the projector is tilted and you adjust KEYSTONE, the center of the screen and the lens need to be realigned.
• Do not force the lens shift dials to turn as this may damage the projector. Turning the dials maximum limit is 4 or 5 times
from the default position.
H
V
SH
SW
Placement
Center of lens
Vertical center of
screen
Projector
Screen
100%
100%
40% 40%
Projector
Shift range