Panasonic PT-AE2000U - Manual (Page 30)

Settings
Menu Navigation
30 -
E
NGLISH
J Displaying the main menu
Press the MENU button to display the main
menu and the operating guidance.
J Adjusting with the bar scale
items
The triangle mark under the bar indicates factory
default setting and the square indicates the current
setting.
J Returning to the previous menu
Press the MENU or RETURN button to return to
the previous menu. Press repeatedly to escape
from the menu mode and return to the projection.
J Operating procedure
1. Press F G to scroll to the required main menu
item and press ENTER to select.
The selected item is highlighted in orange and the
sub-menu is displayed on the right.
See “Main menu and sub-menu” on page 28.
2. Press F G to scroll to the required sub-menu item
and press I H or ENTER to adjust.
The selected item is called up and the other menu
items disappear from the screen. Called up item will
be disappear after 5 seconds and return to the menu
mode.
If there is a lower level, the next level will be
displayed.
3. Press I H to adjust or set the selected item.
For items using a bar scale, the current settings are
displayed on the left of the bar scale.
You can cycle through the options of an item by
pressing I H.
4. Press MENU or RETURN to return to the previous
menu.
Navigating through the MENU
ENTER
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR TEMPERATURE
DYNAMIC IRIS
WAVEFORM MONITOR
ADVANCED MENU
SPLIT ADJUST
MEMORY SAVE
MEMORY LOAD
MEMORY EDIT
PICTURE
POSITION
LANGUAGE
FUNCTION BUTTON
LENS CONTROL
OPTION
SELECT
NORMAL
ON
OFF
RETURN
Main menu Sub-menu
Current
settings
Operating guidance
Contains the required buttons to adjust the settings.
BRIGHTNESS
Current setting
Default
PICTURE
POSITION
OPTION
ENTER
SELECT
H-POSITION
V-POSITION
ASPECT
WSS
OVER SCAN
KEYSTONE
ON LANGUAGE
RETURN
LENS CONTROL
FUNCTION BUTTON
PICTURE
POSITION
ENGLISH
OPTION
ENTER
SELECT
H-POSITION
V-POSITION
ASPECT
WSS
OVER SCAN
KEYSTONE
ON
RETURN
LENS CONTROL
FUNCTION BUTTON
BRIGHTNESS
NOTE:
• See “Resetting to the factory default settings” on page 22 to reset each menu items.