Adjusting the focus and zoom, Switching the picture mode, Adjusting the image – Panasonic PT-AE2000U User Manual
Page 25: Switching off the projector automatically, Nglish - 25, Remote control operation, Basic o p eration
Basic O
p
eration
Remote control operation
E
NGLISH - 25
Q
Adjusting with RGB options
1. Press the ENTER button until the required option
is displayed.
2. Press the PIC. ADJUST twice to display the
GAMMA of the ADVANCED MENU menu.
3. Press G several times to display the required
brightness option.
4. Adjust the brightness option by pressing I H.
Adjust the bottom line of the waveform to 0%
(0 IRE or 7.5 IRE).
Setting range: -16 to +16
5. Press G once to display the required contrast
option.
6. Adjust the contrast option by pressing I H.
Adjust the top line of the waveform to 100%
(100 IRE).
Setting range: -32 to +32
You can adjust the focus and zoom of the
projected image. Press the LENS button to
display the LENS CONTROL menu. See “LENS
CONTROL” on page 39.
You can switch the preset picture mode
settings by pressing the PIC. MODE button.
Press the button until the required setting is
selected. See “PICTURE MODE” on page 31.
You can display the PICTURE and
ADVANCED MENU menu items with called
up style by pressing the PIC. ADJUST
button. Press the button to switch between
PICTURE and ADVANCED MENU menu. Press F G to
select the required menu item and I H to adjust.
Q
PICTURE menu items
PICTURE MODE, CONTRAST, BRIGHTNESS,
COLOR, TINT, SHARPNESS, COLOR
TEMPERATURE and DYNAMIC IRIS
Q
ADVANCED MENU items
GAMMA, CONTRAST, BRIGHTNESS, xvYCC,
DETAIL CLARITY, NR, MPEG NR, CINEMA
REALITY and TV-SYSTEM
You can switch off the POWER
automatically by setting the SLEEP feature.
Press the SLEEP button several times to
cycle through the duration of time. See
“SLEEP” on page 41.
FULL SCAN(R)/SINGLE LINE SCAN(R)
BRIGHTNESS R
Adjust the bottom line of the
waveform to 0% (0 IRE or 7.5 IRE)
CONTRAST R
Adjust the top line of the waveform
to 100% (100 IRE)
FULL SCAN(G)/SINGLE LINE SCAN(G)
BRIGHTNESS G
Adjust the bottom line of the
waveform to 0% (0 IRE or 7.5 IRE)
CONTRAST G
Adjust the top line of the waveform
to 100% (100 IRE)
FULL SCAN(B)/
BRIGHTNESS B
Adjust the bottom line of the
waveform to 0% (0 IRE or 7.5 IRE)
CONTRAST B
Adjust the top line of the waveform
to 100% (100 IRE)
Adjusting the focus and zoom
Switching the picture mode
NORMAL
CINEMA3
DYNAMIC
CINEMA2
COLOR1
COLOR2
CINEMA1
Adjusting the image
NOTE:
• For each menu items description, see “PICTURE
• The screen will be cleared after 7 seconds without
any operation.
Switching off the projector automatically
OFF
240MIN.
60MIN.
210MIN.
90MIN.
180MIN.
120MIN.
150MIN.