Figure 12 – ParaBody 880 User Manual
Page 12
Advertising
![background image](/manuals/184194/12/background.png)
12
FIGURE 12
STEP 12:
• Carefully route the SHORT LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2” PULLEY
(4) to the BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOLT (7), one 3/8” WASHER (5), one CABLE CLIP (11)
and one 3/8” LOCK NUT (6) as shown in FIGURE 12. Make sure the CABLE is in the grooves of all the pulleys.
SEAT FRAME
6
5
4
2
7 3/8 X 1-3/4”
11
BRACKET
0
1
2
3
4
5
6
1/2
1/2
1/2
1/2
1/2
1/2
Advertising
This manual is related to the following products: