ParaBody 880 - Manual (Page 21)

21
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 5
STEP 5:
• Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2” PULLEY
(4) to the BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOLT (7), one 3/8” WASHER (5), one CABLE CLIP (11)
and one 3/8” LOCK NUT (6) as shown in FIGURE 5. Make sure the CABLE is in the grooves of all the pulleys.
SEAT FRAME
6
5
4
3
7 3/8 X 1-3/4”
11
BRACKET