ParaBody 880 - Manual (Page 23)

FIGURE 8
STEP 8:
• Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2” PULLEY
(4) to the SEAT FRAME using one 3/8 X 4-1/2” BOLT (10), two 3/8” FLANGE SPACERS (14), two 3/8 X 1” SPACERS (13) and
one 3/8” LOW HEIGHT LOCK NUT (12) as shown in FIGURE 8. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 4-1/2” 10
4
3 12
13
MAIN ARM
FIGURE 9
STEP 9:
• Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2”
PULLEY (4) to the MAIN ARM using one 3/8 X 2-3/4” BOLT (8), two 3/8” FLANGE SPACERS (14) and one 3/8” LOCK NUT
(6) as shown in FIGURE 9. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 2-3/4” 8
4
3
6
14
3/8” LOW HEIGHT
LOCK NUT
23
14
SEAT FRAME