Figure 11, Figure 10 – ParaBody 880 User Manual
Page 24
FIGURE 11
STEP 11:
• Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2” PULLEY
(4) to the MAIN ARM using one 3/8 X 2-3/4” BOLT (8), two 3/8” FLANGE SPACERS (14) and one 3/8” LOCK NUT (6) as shown
in FIGURE 11. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 2-3/4” 8
4
3
6
14
MAIN ARM
FIGURE 10
STEP 10:
• Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2” PULLEY
(4) to the SEAT FRAME using one 3/8 X 4-1/2” BOLT (10), two 3/8 X 1” SPACERS (13), two 3/8” FLANGE SPACERS (14) and
one 3/8” LOW HEIGHT LOCK NUT (12) as shown in FIGURE 10. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 4-1/2” 10
4
3
12
13
3/8” LOW HEIGHT
LOCK NUT
14
24
0
1
2
3
4
5
6
1/2
1/2
1/2
1/2
1/2
1/2
SEAT FRAME