ParaBody 880 - Manual (Page 26)

26
STEP 13:
• To set the correct amount of tension in the cables, push the HEAD PLATE down, insert the WEIGHT SELECTOR PIN and perform
several repititions at the leg press station.This will relax the cable system and prevent the HEAD PLATE from lifting up.
THIS CONCLUDES THE ASSEMBLY OF THE 880 LEG PRESS ADAPTER KIT
• If further CABLE ADJUSTMENT is needed, reference the 880 GYM SYSTEM USER’S GUIDE.
• There will be extra hardware after completing assembly.
ADJUSTMENT
ADJUSTMENT
FIGURE 13
HEAD PLATE