ParaBody 880 - Manual (Page 22)

22
FIGURE 7
STEP 7:
• Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2” PULLEY
(4) to the bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK NUT (6) as shown in FIGURE 7.
Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 1-3/4” 7
3
6
SEAT FRAME
FIGURE 6
STEP 6:
12
SEAT FRAME
• SECURELY attach the BRACKET (from 100 LEG PRESS) to the SEAT FRAME using two 3/8” X 4-1/2” BOLTS (10), two 3/8”
WASHERS (5), and two 3/8” LOW HEIGHT LOCK NUTS (12). See FIGURE 6.
BRACKET
5
10 3/8 X 4-1/2”
4
3/8” LOW
HEIGHT