Paxar Monarch 917 - Manual (Page 17)

To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press L or R until you see
SUPPLY
l Print Pos r
2. Press E. You will see the current setting, for example:
Enter print pos
[-99/99]: +0
3. Press L or R to change the print position. Pressing L
decreases the value (moves the image down); R increases it
(moves the image up).
4. Press E when the number you need appears. Press e
twice to exit to the Main menu.
S u p p l y P o s i t i o n
This function adjusts how much supply feeds out of the exit chute.
You may need to adjust the supply in or out to allow
◆ tags and labels to be removed.
◆ die cut labels to be removed easily.
The adjustments are in dots (0.0049 inch).
Setting Supply Options 2-5