Paxar Monarch 917 - Manual (Page 37)

To change the setting, from the Main Menu, select Setup, then
Defaults. Then, follow these steps.
1. Press L or R until you see
DEFAULTS
l Slashed Zero r
2. Press E. You will see the current setting, for example:
SLASHED ZERO
l Yes
3. Press L or R until you see the option you want. Then press
E. Press e twice to exit to the Main menu.
P o w e r - U p M o d e
Power-up mode lets you decide how your printer starts each time
you turn it on. If you want the printer to be ready to start printing
when it is turned on, use the Online power-up mode. If you want
the operator to perform some other task first, use the Offline
power-up mode.
To change the setting, from the Main Menu, select Setup, then
Defaults. Then, follow these steps.
1. Press L or R until you see
DEFAULTS
l Powerup Mode r
2. Press E. You will see the current setting, for example:
POWER UP
l Offline
Setting Defaults 5-5