Paxar Monarch 917 - Manual (Page 60)

If you answered "Yes" to the cut option, you have several cut
modes to select from.
Cut Mode Description
Cut after tag
(Cut Mode 1) Cuts before first tag, cuts each tag, and cuts
after last tag.
Cut after batch
(Cut Mode 2) Cuts before first tag, cuts after batch. Cuts in
strips, not each tag.
Cut last ticket
(Cut Mode 3) Cuts before first tag, cuts each tag, cuts after the
last tag and feeds one or two tags past the
printhead when it cuts the last tag in the last
batch.
No cut before
(Cut Mode 4) Does not cut before the first tag in a batch, but
cuts between each tag and after the last tag in
the batch.
If you do not specify a cut mode (cut last ticket, cut after batch, or
no cut before), the knife cuts after each tag. This is the same as
cut mode 1. The knife uses the last selected cut mode. For
example, if you select "Cut Last Ticket" and then select "Yes" to
"Cut After Batch," the knife only cuts after each batch instead of
after the last tag in the batch.
You will see
Cut multiple
[1/32000]: 1 _ _ _ _
9. Type the number of tags to print before cutting and press
E, or accept the default value of 1 by pressing E. A
cut multiple of one cuts after each tag. This is the same as
cut mode 1. You will see
Cut Last Ticket:
No
r
10. If you want to cut the last tag in the batch, press R to display
"Yes" and press E. The printer feeds one or two tags past
the printhead when it cuts the last tag in the last batch.
7-14 Printing