Paxar Monarch 917 - Manual (Page 24)

3. Press L or R to see the other options. After you display the
option you want, press E. Press e twice to exit to the
Main menu. You can only enable or disable
backfeed/extended backfeed. You cannot set the backfeed or
dispense position. Your System Administrator should refer to
the optional Packet Reference Manual to set the backeed or
dispense position.
V e r i f i e r
The verifier scans and checks the quality of bar codes as they are
printed. The optional verifier must be purchased separately.
This option only appears if you are using a
9850 printer.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press L or R until you see
SUPPLY
l Verifier
2. Press E to set the verifier option. You will see the current
setting, for example:
VERIFIER
Disabled r
3. Press l or r to see the other option. After you display the
option you want, press E. Press e twice to exit to the
Main menu. For additional verifier information, refer to your
verifier’s manual.
2-12 Setting Supply Options