Paxar Monarch 917 - Manual (Page 19)

Print too far to the left. Print too far to the right.
◆ If the data is too close to the left side, increase the number.
◆ If the data is too close to the right side, decrease the number.
Changing this setting only affects new
formats sent to the printer.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press L or R until you see
SUPPLY
l Margin Pos r
2. Press E. You will see the current setting, for example:
Enter margin pos
[-99/99]: +0
3. Press L or R to change the margin position. Pressing L
decreases the value (moves the image toward the left side of
the supply); R increases it (moves the image toward the right
side of the supply).
Setting Supply Options 2-7