Panasonic KX-TG5871AL - Manual (Page 31)

Speed Dialler
31
Base unit speed dialler
The base unit speed dialler allows you to
make calls without having to dial manually.
You can assign one phone number to each
of the 10 dial keys ({0} to {9}) on the base
unit.
Adding phone numbers to the
speed dialler
Important:
L Before storing phone numbers, make
sure the base unit is not being used.
1
Press {PROGRAM}.
L The IN USE indicator will flash.
2
Enter the phone number (max. 32
digits).
L If a pause is required for dialling,
press {PAUSE} where needed.
L
If you misdial, press {STOP} and
repeat from step 1.
3
Press {PROGRAM}.
4
Press a dial key ({0} to {9}).
L
The base unit will beep.
L
To store other phone numbers, repeat
from step 1.
Note:
L
If a phone number is stored in a dial key
which already contains a phone number,
the old number will be erased.
L
We recommend you make a note of
which phone numbers are stored in
which dial keys.
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number “9” with a PBX:
In step 2, press {9}, {PAUSE}, then enter
the phone number.
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses. “P”
is displayed when {PAUSE} is pressed.
L When {*} is pressed, “$” is displayed.
When {#} is pressed, “#” is displayed.
To erase a stored phone number
1
Press {PROGRAM} 2 times.
2
Press the desired dial key ({0} to {9}).
L
The base unit will beep.
Calling someone with the speed
dialler
1
Press {SP-PHONE}.
2
Press {AUTO}.
3
Press the desired dial key ({0} to {9}).
L
The stored phone number will be
dialled.
Note:
L
Speed dial numbers stored in the base
unit can only be dialled from the base
unit.
TG5871AL.book Page 31 Friday, June 17, 2005 7:01 PM