Panasonic KX-TG5871AL - Manual (Page 57)

Programmable Settings
57
4
Scroll to “Set recall time”, then
press {SELECT}.
5
Push the joystick up or down repeatedly
to select the desired setting.
6
Press {SAVE}, then press {OFF}.
Note:
L
You can access Telstra’s “EASY CALL”
service by having the recall time set at
100 ms, and then follow Telstra’s “EASY
CALL” instructions to operate this
service.
L If the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Line mode
The line mode is preset to “B” and
generally should not be adjusted. If
S
on the handset is not displayed
and the IN USE indicator on the base unit
does not light properly when another
phone connected to the same line is in
use, the line mode selection is incorrect.
Set line mode to “A”.
1
Press {MENU} (centre of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Set tel line”, then press
{
SELECT}.
4
Scroll to “Set line mode”, then press
{
SELECT}.
5
Push the joystick up or down repeatedly
to select the desired setting.
6
Press {SAVE}, then press {OFF}.
Base unit settings
These features can be set by using the
handset.
Base unit ringer volume
You can also adjust the base unit ringer
volume from the base unit (page 25).
1
Press {MENU} (centre of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Set base unit”, then press
{
SELECT}.
4
Scroll to “Ringer volume”, then press
{
SELECT}.
5
Push the joystick up or down repeatedly
to select the desired volume.
L To turn the ringer off, push the joystick
down repeatedly until “Off ?” is
displayed.
6
Press {SAVE}, then press {OFF}.
Base unit ringer tone
You can also change the base unit ringer
tone from the base unit (page 25).
1
Press {MENU} (centre of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Set base unit”, then press
{
SELECT}.
4
Scroll to “Ringer tone”, then press
{
SELECT}.
5
Push the joystick up or down repeatedly
to select the desired setting.
L
If the ringer volume has been turned
off, the base unit will not ring.
6
Press {SAVE}, then press {OFF}.
TG5871AL.book Page 57 Friday, June 17, 2005 7:01 PM