Panasonic KX-TG5871AL - Manual (Page 55)

Programmable Settings
55
Handset display colour
(Appearance)
You can select the desired display colour.
1
Press {MENU} (centre of joystick).
2
Scroll to L, then press {SELECT}.
3
Scroll to “Appearance”, then press
{
SELECT}.
4
Push the joystick up or down repeatedly
to select the desired colour.
5
Press {SAVE}, then press {OFF}.
Handset LCD contrast
You can adjust the handset display
contrast. There are 6 levels.
1
Press {MENU} (centre of joystick).
2
Scroll to L, then press {SELECT}.
3
Scroll to “LCD contrast”, then press
{
SELECT}.
4
Push the joystick up or down repeatedly
to select the desired setting.
5
Press {SAVE}, then press {OFF}.
Initial setting N
Handset Talking Caller ID
You can turn the Talking Caller ID feature
(page 33) on or off for the handset.
1
Press {MENU} (centre of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Talking CallerID”, then
press {SELECT}.
4
Push the joystick up or down repeatedly
to select “On” or “Off”.
5
Press {SAVE}, then press {OFF}.
Storing your area code
We recommend storing your area code
before using Caller ID (page 32). Calls
from the same area will be recorded in the
caller list without the area code. You do not
have to remove it before calling back the
caller or storing in the phonebook.
1
Press {MENU} (centre of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Set area code”, then press
{
SELECT}.
4
Enter your area code (max. 8 digits).
L To correct a digit, use the joystick to
move the cursor, then press
{
CLEAR}. Enter the correct number.
5
Press {SAVE}, then press {OFF}.
To erase your area code
Press and hold {CLEAR} in step 4, press
{
SAVE}, then press {OFF}.
TG5871AL.book Page 55 Friday, June 17, 2005 7:01 PM