Room monitor – Panasonic KX-TG5871AL User Manual

Page 41

Advertising
background image

Intercom Features

41

Room monitor

This feature allows you to listen in on a
room where the handset or base unit is
located. The monitored extension will not
ring, allowing you to easily monitor, for
example, a baby’s room from different
areas of the house. If you want to prevent
your unit from being monitored by other
extensions, leave this feature OFF
(default).

Setting room monitor

Turning on/off the handset’s room
monitor feature
This allows the handset to be monitored.

1

Press {MENU} (centre of joystick).

2

Scroll to N, then press {SELECT}.

3

Scroll to “Room monitor”, then press
{

SELECT}.

4

Push the joystick up or down repeatedly
to select “On” or “Off”.

5

Press {SAVE}, then press {OFF}.

Turning on/off the base unit’s room
monitor feature
This allows the base unit to be monitored.
This feature must be set by using the
handset.

1

Press {MENU} (centre of joystick).

2

Scroll to N, then press {SELECT}.

3

Scroll to “Set base unit”, then press
{

SELECT}.

4

Scroll to “Room monitor”, then press
{

SELECT}.

5

Push the joystick up or down repeatedly
to select “On” or “Off”.

6

Press {SAVE}, then press {OFF}.

Monitoring a room

Important:

L

Before monitoring, make sure the unit to
be monitored is not in use.

L

The handset to be monitored must be off
the base unit.

L

If you receive a phone call while
monitoring a room, you will hear 2 tones
(page 56, 58). To answer the call with the
handset, press {OFF}, then press {C}
or {s}. To answer the call with the base
unit, press {SP-PHONE} 2 times.

Monitoring with the handset

1

Press {INTERCOM}, then press
{

MONITOR}.

2

To call the base unit, press {0}.
To call another handset, press its
extension number ({1} to {8}).

L

Your handset will start to monitor the
room through the destination unit.

L

To monitor from the speaker, press
{s}

. To switch back to the receiver,

press {C}.

3

To end monitoring, press {OFF}.

L

The base unit user can stop being
monitored by pressing {INTERCOM}
or {SP-PHONE}. The monitored
handset user can stop being
monitored by pressing {OFF}.

Note:

L

The monitored handset displays “Room
monitor
”.

TG5871AL.book Page 41 Friday, June 17, 2005 7:01 PM

Advertising