Panasonic KX-TG5871AL - Manual (Page 75)

Useful Information
75
---Incomplete---
Tom Jones
0555654321
Phonebook full
(The name/number is an
example.) L
When phonebook items were sent to another handset,
the handset’s phonebook memory was full and copying
stopped. Press {OFF} to exit. Erase items from another
handset’s phonebook (page 28). When phonebook
memory is available, you can copy all phonebook items
(page 30) or individual items one by one (page 29).
---Incomplete---
Tom Jones
0555654321
(The name/number is an
example.) L The destination handset is out of area.
L
The destination handset user may have pressed {C}
or {s}.
Invalid L
There is no handset registered to the base unit
matching the extension number you entered.
L
You selected your own extension number.
L
You cannot rename the preset song.
Invalid.
Please register
to the base unit L
The handset you tried to call has not been registered to
the base unit. Register the handset (page 59).
Memory full L
There is no space in memory to record new songs.
Erase unnecessary songs.
No items stored L
Your phonebook or redial list is empty.
L Colour display models (KX-TGA582AL only):
“User data” is empty. You can download your original
data for the wallpaper and picture ID from a PC. Refer
to the help section of the GIGARANGE USB Utility
software for details.
No link to base.
Move closer to
base, try again. L
The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L Confirm that the base unit’s AC adaptor is plugged in.
L
Raise the base unit antennas.
L
The handset’s registration may have been cancelled.
Re-register the handset (page 59).
Not erasable L You cannot erase the preset song.
Phonebook full L There is no space to store new items in the phonebook.
Erase unnecessary items (page 28).
Please lift up and
try again. L
A handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.
System is busy.
Please try again
later. L The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L
Other units are in use and the system is busy. Try again
later.
L
Another user is listening to messages. Try again later.
Display message Cause & solution
TG5871AL.book Page 75 Friday, June 17, 2005 7:01 PM