Powerware 9125 Two-in-One UPS 2500 - Manual (Page 28)

INSTALLATION
EATON Powerware ® 9125 Two-in-One UPS (2500/3000 VA) User’s Guide S 164201374 Rev D
www.powerware.com
22
Extended Battery Module Installation
C A U T I O N
A small amount of arcing may occur when connecting an EBM to the UPS. This is normal and
will not harm personnel. Insert the EBM cable into the UPS battery connector quickly and
firmly.
To install the optional EBMs:
1. If installing an EBM with an E/EH UPS model, skip to Step 4;
otherwise, continue to Step 2.
2. Plug the EBM cable(s) into the battery connector(s) as shown in
Figure 14. Up to four EBMs may be connected to the UPS.
3. Continue to “Plug-Receptacle UPS Installation” on page 25 or
“Hardwired UPS Installation” on page 27.
UPS Battery Connector
EBM Cable
UPS
EBM
EBM
EBM Battery
Connectors
Figure 14. Typical EBM Installation (120V UPS Model Shown)