119 setup from the front panel and websetup – Panasonic KX-P8420 User Manual

Page 119

Advertising
background image

119

Setup from the Front Panel and WebSetup

Subnet Mask— If you need to set the subnet mask, enter one of the
following values:

255.0.0.0

if the IP address starts with a number less than 128

255.255.0.0

if the IP address starts with a number from 128 through 191

255.255.255.0

if the IP address starts with a number greater than 191

Be sure to confirm the subnet mask setting with your network administrator
before proceeding. In some cases the required setting may be different from
those listed.

Enable on Token Ring—Enable this option if you have a TCP/IP network
connected to the KX-P8420 over Token Ring. If you use Token Ring,
enabling TCP/IP for Token Ring is required for enabling the Fiery WebTools.

IP Address—Enter the KX-P8420 IP address for Token Ring. The
KX-P8420 is shipped with the IP address set to the loopback address,
(127.0.0.1)

which is an internal address used for network checking. If you

plan to print with TCP/IP, you must first assign the KX-P8420 a unique
network IP address. For information about setting up printing with TCP/IP,
see “Setting up TCP/IP printing” on

page 53

.

Subnet Mask—If you need to set the subnet mask, enter one of the
following values:

255.0.0.0

if the IP address starts with a number less than 128

255.255.0.0

if the IP address starts with a number from 128 through 191

255.255.255.0

if the IP address starts with a number greater than 191

Be sure to confirm the subnet mask setting with your network administrator
before proceeding. In some cases the required setting may be different from
those listed.

Gateway—If your TCP/IP network has a gateway, and users outside the
gateway plan to print to the KX-P8420 using TCP/IP, enter the gateway
address here. By default, the loopback address, 127.0.0.1, is set. Obtain the
correct gateway address from your network administrator.

Enable AppleTalk—Enable this option if you have an AppleTalk network
connected to the KX-P8420. This setting enables the KX-P8420 to
communicate over AppleTalk networks.

Advertising