Parallel cable connection, Parallel cable connection” on – Panasonic KX-P8420 User Manual
Page 52
52
Connecting the Printer to a Network
Parallel cable connection
In addition to receiving print jobs over the network, the printer can accept
print jobs directly from an IBM compatible computer through its high-speed,
Centronics compatible parallel port. This connection is also advantageous
for workstations on dedicated networks using protocols other than
AppleTalk, TCP/IP, or IPX.
The parallel port connection can be used simultaneously with a network
connection.
CAUTION:
•
Always use a shielded interface cable. Use of an unshielded cable can
result in radio interference with data.
NOTE:
•
Printing through a serial port (Local Talk) is not supported on Macintosh
computers.
To connect a parallel cable to the printer:
1
With the printer and the computer turned off, attach the
Centronics Type C parallel cable (not included) to the
parallel port.
2
Connect the other end of the cable to the parallel port on
the computer.
3
Turn on the printer and turn on the computer.
For parallel port settings, see “Parallel Port Setup” on
Parallel port