Panasonic KX-P8420 - Manual (Page 164)

164
Care and Maintenance
To clear media jams in location D with face down printing:
SAFETY CAUTION:
• The fuser is hot; to avoid personal injury, turn off the printer and wait
10 minutes (after opening the front door) for the fuser to cool before
touching it.
NOTE:
• First check the exit opening for media that has jammed and folded like an
accordion. It is especially difficult to see if the media is transparency film.
1 a) Open the front door.
b) Pull open the access door (above the plastic output
tray); see if the media is visible.
2 a) Turn the large green knob on the fuser
counterclockwise.
b) Remove the media from inside the access door.
b
a
b
a