Options, Upgrade options, Chapter 9 – Panasonic KX-P8420 User Manual
Page 193
Chapter 9
193
Options
Upgrade options
The following upgrade options and consumables are available for the
KX-P8420 Color Printer from your local Panasonic reseller:
•
Hard Disk Drive (KX-PDHD1) for storing print jobs, and additional fonts
(
•
16 MB (KX-PEMD1) or 32 MB (KX-PEMD2) SDRAM DIMMs (
Two DIMM slots for additional memory are available on the printer
controller board. Each slot can support a 16 MB or 32 MB SDRAM DIMM.
•
Ethernet (KX-PNBC5) or Token Ring (KX-PNBC6) network card
(
You must remove the printer controller board from the back of the
KX-P8420 in order to install or replace the hard disk, add or replace
memory, or install a Token Ring or Ethernet network card.
Removing and replacing the printer controller board
To remove the printer controller board:
1
Turn the printer OFF, unplug the power cord and
disconnect any cables connected to the connectors on
the back of the printer.
2
Loosen the two thumbscrews that secure the printer
controller board to the back of the printer, using a cross-
point head (+) screwdriver.