Paxar Mobile Printing Station Monarch 9476 - Manual (Page 13)

n
Do Not set the top shelf to the highest adjustment.
5. Attach the plastic cable-tube clamp around the bottom of
the cable tube as shown (if it is not already attached).
Squeeze the finger grips to lock the clamp around the
cable tube. Use pliers to secure the cable clamp tightly.
(Figure 3.)
Step 3: Attaching the Cabinet Handle and Cord Bracket ------------------
Follow the steps below to install the cabinet handle and cord
bracket.
1. Remove the following items from their packaging:
✦ chrome handle insert
✦ two 5/8" phillips screws (black)
✦ cord bracket
✦ two 8-32 x 1/2" slotted screws (black)
✦ two 8-32 nuts/lockwashers (black)
Chapter 1. Assembling the Station
1-7