Paxar Mobile Printing Station Monarch 9476 - Manual (Page 22)

3. Place the battery on the cabinet floor. Remove the
cardboard packaging. Use a 15mm bolt, washer,
lockwasher, and M5 nut to attach the white battery wire to
the positive (+) battery post. (Figure 11.)
4. Slide the battery to the back of the cabinet.
5. Use a 15mm bolt, washer, lockwasher, and M5 nut to
attach the two black wires and green (ground) wire to the
negative (-) battery post. (Figure 11.)
6. Position the battery between the retainer rods. The writing
on the battery should face out. (Figure 12.)
Figure 11
Green
Ground
Wire
Black
Wires
Negative (-)
Positive (+)
White
Wire
9476 Assembly and Setup Instructions
1-16