Paxar Mobile Printing Station Monarch 9476 - Manual (Page 15)

Attach the Push Handle
1. Remove the following items from their packaging:
✦ (1) push handle
✦ (4) 1/4"-20 x 3/4" hex bolts
✦ (4) 1/4"-20 nuts
✦ (4) 1/4"-20 washers
2. Attach the push handle to the front or rear of the Station
using four 3/4" hex bolts, 1/4"-20 washers, and 1/4"-20
nuts as shown. (Figure 5.)
Figure 5
Push
Handle
Chapter 1. Assembling the Station
1-9