Paxar Mobile Printing Station Monarch 9476 - Manual (Page 29)

2. Position the printer bracket on the top shelf of the Station,
facing one of the Station’s fan-fold slots as shown. Align
the holes in the printer bracket with the holes in the shelf
and fasten with 8mm screws and M4 nuts. (Figure 16.)
n
All printer brackets must face the same direction.
Attach the Printers
For each printer you install, follow these steps:
n
See your 9490 Operator’s Handbook for more information on
attaching the power pack and communication cable.
Figure 16
Printer
Bracket
Fan-Fold
Slot
Chapter 1. Assembling the Station
1-23