Paxar Mobile Printing Station Monarch 9476 - Manual (Page 47)

Reloading a Ribbon Cassette ------------------------------------------------------------------
To reload your ribbon cassette, remove the ribbon cassette
from the printer and follow these steps:
1. Locate the end of the cassette with the two latches.
n
Locate the International Symbols for opening and closing.
( ) indicates the cassette is locked (closed). ( ) indicates
the cassette is unlocked (open).
2. Rotate both latches until they snap into the unlocked
position.
3. Lift off the half of the cassette without the latches and set
it aside. (Figure 36.)
Figure 36
Ridged End of
Take-up Reel
Latch
Gear
Ribbon
Spool
Foam
Washer
Latch
Chapter 2. Loading Supplies
2-15