Turning off the power – Panasonic PT-AE900U User Manual

Page 15

Advertising
background image

E

NGLISH

-29

Basic

operation

28-E

NGLISH

NOTE:
B During projection of an image, the cooling fan will operate, emitting a

small noise as it operates. This noise may change depending on the
ambient temperature. Turning the lamp on or off will cause this noise to
increase a little.

B By using the “OPTION” menu to set “LAMP POWER” to “LOW”, the

operating sound of the fan can be reduced. (Refer to page 53.)

B You can also turn off the power by pressing the POWER button twice or

by holding it down for at least 0.5 seconds.

B When the projector is in standby mode (the power indicator on the

projector is illuminated red), the projector continues to draw approximately
0.08 W of power even when the cooling fan has stopped.

˛

#

˛

$

˛

%

Turning off the power

Power indicator

Press the POWER button.

BA confirmation screen is displayed on

the screen.

Press the I

I or H

H button to select “OK”, and

then press the ENTER button.

BThe lamp unit will switch off and the picture will stop being projected.

(The power indicator on the projector will illuminate orange while the
cooling fan is still operating.)

#

$

%

Press the MAIN POWER switch to turn off the
power after the power indicator on the
projector illuminates red.

BDo not cut power to the projector in any way while the cooling fan is

still operating. Be careful not to switch off the MAIN POWER switch
of the projector or unplug the power cord from the wall outlet.

Power indicator

Power indicator status

Red

Illuminated

The projector is in standby mode and image projection
is possible by pressing the POWER button.

A picture is being projected.
The lamp is cooling down after the power is turned
off. (The cooling fan is operating.)
The projector is preparing for projection after the
power is turned on while the power indicator is
illuminated orange. (After a short period, a picture
will be projected.)

The projector is preparing for projection after the
power is turned on while the power indicator is
illuminated red. (After a short period, a picture will be
projected.)

Flashing

Illuminated

Illuminated

Flashing

Green

Orange

Projector status

Advertising