Panasonic PT-AE900U - Manual (Page 6)

E NGLISH -11
Preparation
10-E NGLISH
Accessories
Check that all of the accessories shown below have been included with your
projector.
Before use
Cautions regarding setting-up
Avoid setting up in places which are subject to vibration or shocks.
The internal parts can be damaged, which may cause malfunctions or
accidents.
Avoid setting up in places which are subject to sudden temperature
changes, such as near an air conditioner.
The life of the lamp may be shortened.
Do not set up the projector near high-voltage power lines or near
motors.
The projector may be subject to electromagnetic interference.
If installing the projector to the ceiling, ask a qualified technician to
carry out all installation work.
You will need to purchase the separate installation kit (Model No.ET-PKE300/
ET-PKE700). Furthermore, all installation work should only be carried out by a
qualified technician.
If using this projector at high elevations (above 1 400 m), set the “FAN
CONTROL” to “HIGH”. (Refer to page 53.)
Failure to observe this may result in malfunctions.
NOTICE:
B This product has a High Intensity Discharge (HID) lamp that contains a
small amount of mercury. It also contains lead in some components.
Disposal of these materials may be regulated in your community due to
environmental considerations. For disposal or recycling information
please contact your local authorities, or the Electronics Industries
Alliance: <http://www.eiae.org.>
Remote control unit
(EUR7914Z20 x1)
AA batteries for remote control unit
(x2)
Power cord
(K2CG3FR00001 x 1)