Panasonic PT-AE900U - Manual (Page 23)

E NGLISH -45
Adjustments
and
settings
44-E NGLISH
Adjusting the picture
# Press the MENU button to display the menu screen.
$ Select the “PICTURE” menu from the main menu, and then press the
ENTER button.
% Press the F or G button to select an item.
& Press the I or H button to adjust the value or change the setting. For
items with selective setting or a bar scale, the individual adjustment
screen will be displayed. Press the F or G button to switch the item.
For items without any selective setting or bar scale, press the ENTER
button. The next screen for the item will then be displayed.
When an S-VIDEO/VIDEO signal
is being input
When a YP B P R /PC/HDMI signal is
being input
PICTURE MODE
The picture mode can be selected.
Refer to page 33 for details.
CONTRAST
This adjusts the contrast of the
picture. (Adjust the “BRIGHT”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright: I button
The picture is dark:
H button
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
COLOR
(S-VIDEO/VIDEO/YP B P R /PC/HDMI
only)
The color is too deep: I button
The color is too pale: H button
TINT
(NTSC/NTSC 4.43/YP B P R /PC/HDMI
only)
This adjusts the flesh tones in the
picture.
The flesh tones are greenish: I button
The flesh tones are reddish: H button
SHARPNESS
To soften the picture details:
I button
To sharpen the picture details:
H button
COLOR TEMP.
White areas are bluish: I button
White areas are reddish: H button
DYNAMIC IRIS
ON
The amount of light is controlled to
project the images with high
contrast.
OFF
“DYNAMIC IRIS” is disabled.
Noise Reduction (NR)
If the signal is of such poor quality
that picture interference appears,
set “NR” to “ON”. To turn off the
“NR” feature, set to “OFF”.
CINEMA REALITY
[S-VIDEO/VIDEO/525i(480i) and
625i(576i) signals for YP
B P R
signals/1 125(1 080)/60i and 1
125(1 080)/50i signals for YP
B P R ,
HDMI and PC signals only]
ON
Set to “ON” when you would like 24
frames per second pictures (such as
movies) to project the source
faithfully.
OFF
Set to “OFF” when the projected
pictures have problems with
captions or subtitles when the
setting is “ON”.
NOTE:
B When PC signals are being
input, adjustment can be made
only when 1 125 (1 080)/60i
and 1 125 (1 080)/50i signals
are being input.
NOTE:
B When PC signals are being
input, adjustment can be made
only when 1 125 (1 080)/60i
and 1 125 (1 080)/50i signals
are being input.