Panasonic PT-AE900U - Manual (Page 16)

E NGLISH -31
Useful
functions
30-E NGLISH
Setting the aspect ratio (ASPECT)
This projector allows you to change the aspect ratio to match the type of
input signal.
JUST\4:3\16:9\14:9\ZOOM1\ZOOM2
4:3\16:9\V SCROLL
*“V SCROLL” cannot be set when a VGA or
SVGA signal is being input.
4:3\16:9
[When a 525p (480p) or 625p (576p) signal is
being input]
4:3\16:9\JUST\ZOOM
[When an NTSC, 525i (480i) or 525p (480p)
YP
B P R signal is being input]
AUTO\4:3\16:9\JUST\ZOOM
S-VIDEO/VIDEO/
YP B P R 1/YP B P R 2
PC
HDMI
Press the ASPECT button.
BPressing the ASPECT button will change the
aspect ratio according to the successive settings
shown below.
BRefer to the illustrations in the table for
assistance in selecting a suitable aspect ratio.
H-FIT
[1 125 (1 080) /60i,
1 125 (1 080) /50i,
1 125 (1 080) /24p,
750 (720) /60p
and 750 (720) /50p
signals only]
Horizontal expansion of
projected image
JUST Horizontal expansion of projected image
(Center of image is less distorted.)
ZOOM, ZOOM1
ZOOM2
(“ZOOM2” is for
2.35 : 1 letterbox
signals.)
Expansion preserves
original ratio
V SCROLL
(XGA/MXGA/SXGA/
WIDE768 only)
A picture is projected without
expansion or reduction.
ASPECT Input signal Projected image
14:9 Expansion preserves
original ratio
4:3 4:3
ASPECT Input signal Projected image
16:9 Horizontal expansion of
projected image
B The aspect ratios for the following signals will be switched between 16:9
and “H-FIT”. (Refer to page 64.)
1 125 (1 080) /60i, 1 125 (1 080) /50i, 1 125 (1 080) /24p, 750 (720) /60p,
750 (720) /50p
B The aspect ratios for the following signals are fixed, and cannot be changed.
WIDE 480/600/720/768/768-2
*WIDE768 signals can be set to “V SCROLL”.