Panasonic PT-AE900U - Manual (Page 32)

Other
s
E NGLISH -63 62-E NGLISH
Specifications
Power supply: 100 V - 240 V ~, 50 Hz/60 Hz
Power consumption: 180 W [During standby (when fan is
stopped): Approx. 0.08 W]
Amps: 2.2 A - 1.0 A
LCD panel:
Panel size (diagonal): 0.7 type (17.78 mm)
Aspect ratio: 16:9
Display method: 3 transparent LCD panels (RGB)
Drive method: Active matrix method
Pixels: 921 600 (1 280 x 720) x 3 panels
Lens: Manual zoom (2x) / Manual focus
F 1.9 - 3.1, f 21.7 mm - 43.1 mm
Lamp: UHM lamp (130 W)
Luminosity: 1 100 lm
Scanning frequency(for RGB signals):
Horizontal scanning frequency: 30 kHz - 70 kHz
Vertical scanning frequency: 50 Hz - 87 Hz
Dot clock frequency:
Less than 108 MHz
YP B P R signals: 525i (480i), 525p (480p), 625i (576i),
625p (576p), 1 125 (1 080)/60i,
1 125 (1 080)/50i, 1 125 (1 080)/24p,
750 (720)/60p, 750 (720)/50p
Color system: 7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/
PAL60/SECAM)
Projection size: 1 016 mm - 5 080 mm (40˝ - 200˝)
Throw distance: 1.2 m - 12.4 m (3´11˝ - 40´8˝)
Screen aspect ratio: 16:9
Installation: Front/Rear/Ceiling/Desk (Menu selection
method)
Connectors
S-VIDEO IN: Single-line, Mini DIN 4-pin
Y: 1.0 V [p-p], C: 0.286 V [p-p], 75
Ω
VIDEO IN: Single-line, RCA pin jack
1.0 V [p-p], 75
Ω
PC IN:
RGB: Single-line, D-sub HD 15-pin (female)
R.G.B.: 0.7 V [p-p], 75 Ω
G.SYNC: 1.0 V [p-p], 75 Ω
HD/SYNC: TTL high impedance, automatic
positive/negative polarity compatible
VD: TTL high impedance, automatic
positive/negative polarity compatible
COMPONENT IN:
Y, P B /C B , P R /C R Dual-line, RCA pin jack x 3
Y: 1.0 V [p-p] (Including sync), 75 Ω
P B ,P R (C B ,C R ): 0.7 V [p-p], 75 Ω
HDMI IN: Single-line, 19-pin HDMI connector
SERIAL: DIN 8-pin RS-232C compatible
Cabinet: Moulded plastic (ABS/PC)
Dimensions:
Width: 335 mm (13-3/16˝)
Height: 104 mm (4-3/32˝)
Length: 270 mm (10-5/8˝) (Not including lens)
Weight: 3.6 kg (7.9 lbs.)
Operating environment:
Temperature: 0 °C - 40 °C (32 °F - 104 °F)
[When the “FAN CONTROL” is set to “HIGH”
(page 53): 0 °C - 35 °C (32 °F - 95 °F)]
Humidity: 20% - 80% (no condensation)
Certifications: UL60950, C-UL
FCC Class B
<Remote control unit>
Power supply: 3 V DC (AA battery x2)
Operating range: Approx. 7 m (23´) (when operated directly
in front of signal receptor)
Weight: 170 g (6.0 ozs.) (including batteries)
Dimensions:
Width: 52 mm (2-1/32˝)
Length: 200 mm (7-27/32˝)
Height: 28.5 mm (1-3/32˝) (Not including the
projection parts)
<Options>
Ceiling bracket ET-PKE700
Ceiling bracket ET-PKE300
(for low ceilings)
Projection screen
ET-SRW90CT
Serial adapter ET-ADSER
(DIN 8-pin/D-sub 9-pin)