Nortel Networks 8000 Series - Manual (Page 53)

Adding and replacing DC power supplies 53
Installing a DC Power Supply in an Ethernet Routing Switch 8000 Series Chassis
Figure 33 Replacing the bottom front bezel on the 8010co chassis
2 Align the captive screws with the holes on the front of the chassis ( Figure 33 ).
3 Push the sides of the bezel into place.
4 Using a Phillips screwdriver, tighten the two screws to secure the bezel to the
chassis (
Figure 33 ).
Fail Pass
Fail Pass
Bottom bezel
10363FABIPnew_1