Nortel Networks 8000 Series - Manual (Page 54)

54 Adding and replacing DC power supplies
313070-E Rev 00
Replacing bezel model 321325-A
To replace the bottom front bezel:
1 Insert the three bottom bezel tabs behind the return flange on the power
module (
Figure 34 ).
Figure 34 Replacing the front bezel on the 8010co chassis
2 Place the top of the bezel against the chassis.
3 Align the captive screws with the holes on the front of the chassis ( Figure 34 ).
4 Using a Phillips screwdriver, tighten the two screws to secure the bezel to the
chassis (
Figure 34 ).
Fail Pass
Fail Pass
Bezel
Bottom tab
Return flange