Nortel Networks NB5PLUS4/W - Manual (Page 16)

NB5Plus4/W User Guide YML754Rev1
1 www.netcomm.com.au
Configuring your NB5Plus4/W
You will need to log directly into the configuration page of the modem and configure
the basic settings for your Internet connection. Your ISP should provide you with the
necessary information to complete this step.
The settings that you most likely need to change to access the Internet are grouped onto
a single EasyConfig page.
To configure your modem follow the steps below:
Note: Ensure that your PC is setup as a DHCP client. Refer to the Computer
Hardware Configuration section for instructions on how to set this up with
different Operating Systems.
1. Insert the CD into your CD-ROM drive. An autorun screen will appear. Click on
Con­fig­ure Modem.
(Altern­atively, if the CD-ROM is n­ot available, you can­ open­ a web
browser an­d type http://192.168.1.1 in­ the location­ bar to access the
modem’s EasyCon­fig­ setup screen­ directly.)
2. The login page will be displayed. Enter the modem’s username and password.
The default username is admin­.
The default password is admin­.
Click on Log In.
3. The EasyConfig page will be displayed.