Nortel Networks NB5PLUS4/W - Manual (Page 80)

NB5Plus4/W User Guide YML754Rev1
0 www.netcomm.com.au
proprietary and is only available when
both NetComm wireless cards (e.g.
NP543 / NP542) and the NB5Plus4W are
used.
User Isolation When checked, wireless users will not
be able to directly access other wireless
users. More details on User Isolation are
discussed in the ‘‘User Isolation’’ section
below.
User Isolation
When User Isolation is enabled, wireless users will not be able to directly access
other wireless users. Access can be controlled by the AP. This is enabled on the
network side.
The figure below demonstrates the User Isolation feature.
1. AP disabled BSS (Basic Service Set) bridging
2. All data sent to WAN (Wide Area Network)
3. Enable/Disable flag
Save Your Changes
Follow these steps to save changes you have made on the Wireless Setup screen.