Nortel Networks NB5PLUS4/W - Manual (Page 81)

YML754 Rev1 NB5Plus4/W User Guide
www.netcomm.com.au 1
CAUTION: Any changes you make to the WLAN screen do NOT get saved auto-
matically. Clicking on the ‘Apply’ button on the individual page is not
sufficient for the changes you made to take effect. For change(s) you
made to any WLAN screen to take effect, you will need to perform these
steps.
1. Click the Apply button.
2. Click the Restart Access Point link at the bottom of the page, which will take you
to the System Commands screen.
Note: An alternative way to access the System Commands Screen to click on the
Tools tab, then select the System Commands option.
3. On the System Commands Screen, click Save All. This will save all the changes
you have made. You will still need to restart the access point for any changes to
take effect.
4. If you only made changes to the WLAN setting(s), click the Restart Access Point
button for the changes to take effect. OR
5. If you also made changes to the DSL setting(s), click the Restart button for all
changes to take effect.
Wireless>Configuration
You can access the Configuration screen by clicking on the Configuration link. This
screen provides an advanced wireless network parameter settings.
Following is a description of the Wireless Configuration fields:
Option Description
Beacon­ Period The time interval between beacon frame
transmissions, which ranges from 0 -
65535 msec.
DTIM period Delivery Traffic Identification Map