Nortel Networks NB5PLUS4/W - Manual (Page 89)

YML754 Rev1 NB5Plus4/W User Guide
www.netcomm.com.au 
You can access the Multiple SSID screen by clicking on the Multiple SSID button un-
der the Management option. The Enable SSID field will enable you to create multiple
SSIDs for the AP.
Note: Currently VLAN (Virtual LAN) + Multiple SSID with different security op-
tions is not supported. If security is enabled, you will not be able to enable
multiple SSID. You can only enable multiple SSID if your security option is
set to “None”.
You can create multiple SSIDs by performing the following procedures.
Create an Access List
1. Check Enable Multiple SSID.
2. Enter the name of the first SSID in the SSID field, then click the Add button.
Repeat this step for each additional SSID. The SSIDs will appear as shown in
below.
3. To delete an SSID, check the SSID, then click Delete in the popup window. To
delete all SSIDs, check Delete All.
4. To save your settings, refer to the ‘‘Save Your Changes’’ section above.
Status
You can access this screen by clicking on the Status button.
Use the following procedures to check your Wireless status.