Traffic queuing configuration – Nortel Networks NB5PLUS4/W User Manual
Page 44
Advertising
NB5Plus4/W User Guide
YML754Rev1
44
www.netcomm.com.au
Rule definitions will be defined by the user by allowing the user to select matching
based on Source IP, Destination IP, IP Protocol, Source Port, Destination Port, and
Incoming Mac Port (switched LAN Port). These selections will define a rule and be
associated with a particular queue priority: High, Medium, and Low.
Traffic Queuing Configuration
Based on the TOS (DSCP) marking, the NB5Plus4/W shall prioritize the traffic serv-
icing on the outgoing interface (facing the Access Network) using a 3-band priority
mechanism as described below.
Queue Priorities:
Advertising