NETGEAR Cable/DSL ProSafe Firewall FR328S User Manual
Page 115
Advertising
FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
Preparing Your Network
C-3
M-10207-01, Reference Manual v2
You must have an Ethernet adapter, the TCP/IP protocol, and Client for Microsoft Networks.
If you need to install a new adapter, follow these steps:
a.
Click the Add button.
b.
Select Adapter, and then click Add.
c.
Select the manufacturer and model of your Ethernet adapter, and then click OK.
If you need TCP/IP:
a.
Click the Add button.
b.
Select Protocol, and then click Add.
c.
Select Microsoft.
d.
Select TCP/IP, and then click OK.
Note: It is not necessary to remove any other network components shown in the
Network window in order to install the adapter, TCP/IP, or Client for Microsoft
Networks.
Advertising