NETGEAR Cable/DSL ProSafe Firewall FR328S - Manual (Page 64)

FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
6-2 Managing Your Network
M-10207-01, Reference Manual v2
This screen shows the following parameters:
Table 6-1. Menu 3.2 - Router Status Fields
Field Description
System Name This field displays the Host Name assigned to the firewall in the Basic
Settings menu.
Firmware Version This field displays the firewall firmware version.
LAN Port These parameters apply to the Local (WAN) port of the firewall.
MAC Address This field displays the Ethernet MAC address being used by the Local
(LAN) port of the firewall.
IP Address This field displays the IP address being used by the Local (LAN) port of
the firewall. The default is 192.168.0.1
IP Subnet Mask This field displays the IP Subnet Mask being used by the Local (LAN)
port of the firewall. The default is 255.255.255.0
DHCP If set to OFF, the firewall will not assign IP addresses to local PCs on the
LAN.
If set to ON, the firewall is configured to assign IP addresses to local
PCs on the LAN.
WAN Port These parameters apply to the Internet (WAN) port of the firewall.
MAC Address This field displays the Ethernet MAC address being used by the Internet
(WAN) port of the firewall.
IP Address This field displays the IP address being used by the Internet (WAN) port
of the firewall. If no address is shown, the firewall cannot connect to the
Internet.
DHCP If set to None, the firewall is configured to use a fixed IP address on the
WAN.
If set to Client, the firewall is configured to obtain an IP address
dynamically from the ISP
IP Subnet Mask This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the firewall.
Domain Name Servers
(DNS)
This field displays the DNS Server IP addresses being used by the
firewall. These addresses are usually obtained dynamically from the ISP.