NETGEAR Cable/DSL ProSafe Firewall FR328S - Manual (Page 119)

FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
Preparing Your Network C-7
M-10207-01, Reference Manual v2
The TCP/IP Control Panel opens:
2. From the “Connect via” box, select your Macintosh’s Ethernet interface.
3. From the “Configure” box, select Using DHCP Server.
You can leave the DHCP Client ID box empty.
4. Close the TCP/IP Control Panel.
5. Repeat this for each Macintosh on your network.
MacOS X
1. From the Apple menu, choose System Preferences, then Network.
2. If not already selected, select Built-in Ethernet in the Configure list.
3. If not already selected, Select Using DHCP in the TCP/IP tab.
4. Click Save.