NETGEAR Cable/DSL ProSafe Firewall FR328S User Manual

Page 33

Advertising
background image

FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2

Connecting the Firewall to the Internet

3-13

M-10207-01, Reference Manual v2

1.

Enter your assigned IP Address, Subnet Mask, and the IP Address of your ISP’s gateway
router. This information should have been provided to you by your ISP. You will need the
configuration parameters from your ISP you recorded in

“Record Your Internet Connection

Information” on page 3-3

.

2.

Enter the IP address of your ISP’s Primary DNS Server. If a Secondary DNS Server address is
available, enter it also.

Note: DNS servers are required to perform the function of translating an Internet name such
as www.netgear.com to a numeric IP address. For a fixed IP address configuration, you must
obtain DNS server addresses from your ISP and enter them manually here. You should reboot
your PCs after configuring the firewall for these settings to take effect.

3.

Click Apply to save the settings.

4.

Click Test to test your Internet connection. If the NETGEAR website does not appear within
one minute, refer to

Chapter 8, Troubleshooting

.

Configuring a Serial Port as the Primary Internet Connection

Use the procedure below to configure an Internet connection via the serial port of your firewall.

How to Configure the Serial Port for an Internet Connection

There are three steps to configuring the serial port of your firewall for an Internet connection:

1.

Connect the firewall to your ISDN or dial-up analog modem

2.

Configure the firewall

3.

Connect to the Internet

Follow the steps below to configure a serial port Internet connection on your firewall.

1.

Connect the Firewall to your ISDN or dial-up modem

a.

Turn off your modem and connect the cable from the serial port of the FR328S to the
modem.

b.

Turn on the modem and wait about 30 seconds for the lights to stop blinking.

2.

Configure the Serial Port of the Firewall.

a.

Use a browser to log in to the firewall at http://192.168.0.1 with its default User Name of

admin

and default Password of

password

, or using whatever Password you have set up.

Advertising